The black screen of death issue that may occur to any smartphone including the new Samsung Galaxy Note 10 will always leave an impression that the problem is with the hardware since the phone would no longer respond when it happens.
But as long as your phone doesn’t have any signs of physical or liquid damage, you should still be able to fix it on your own without having to take a trip back to Samsung Experience store just to have it checked.
In this article, I will share with you the most effective solution to the black screen of death issue. We will fix your Galaxy Note 10 that’s stuck on the black screen and would no longer respond.
- Fixing Your Galaxy Note 10 That’s Stuck on the Black Screen of Death
- What do You do When Your Samsung Screen Goes Black?
- What to do if Your Phone Turns on But The Screen is Black?
- What Causes a Samsung Phone Screen to go Black?
- How do You Reset a Black Screen on a Galaxy Note 20?
- How do I Fix my Black Screen?
- How do I Fix a Black Screen on my Android?
- Why Has my Screen Gone Black?
- How do I Reset my Galaxy Note 20?
- How do I Fix my Note 20?
- How do I Open my Galaxy Note 20?
- Can The Black Screen of Death be Fixed?
- Why Does my Screen go Black And Then Come Back on?
- Why is my Google Screen Black on Android Phone?
- How do I Soft Reset my Note 20?
Fixing Your Galaxy Note 10 That’s Stuck on the Black Screen of Death
Before we move on, if your device didn’t power on out of the box or if it turned off shortly after the unboxing, then don’t bother yourself in troubleshooting it as it’s clearly a hardware issue that there’s only so much you can do about it. The best thing to do is to go back to the store and have it replaced.
Read Also: Why is my Samsung Phone Working But The Screen is Black?
However, if you were able to use it and then you discovered that it’s powered off or no longer responds, then here’s what you should do:
First solution: Force restart to fix Black Screen of Death
This must be the first thing that you have to do. In fact, it can be the only procedure you need to do to make your Galaxy Note 10 that’s stuck on the black screen of death respond again. Most of the time, when a phone gets stuck on the black screen, it’s because of a firmware crash and that’s not really that difficult to fix. A Forced Restart can be the only thing you need. Here’s how it’s done:
- Press and hold the Volume Down button and don’t release it yet.
- While holding down the volume button, press and hold the Power key as well.
- Keep both keys held down together for 15 seconds or until the Galaxy Note 10 logo shows on the screen.
If you were able to make the logo show on the screen with this, then that’s a sign that the problem is already fixed. After all, you already made the phone respond and most of the time, the device will continue to boot up into the lock screen. However, if it still remains on the black screen of death, then do the same procedure a few more times before moving on to the next solution.
Second solution: Charge your Note 10 that do the forced restart
If your phone is still not responding after doing the forced restart a few times, then it’s possible that the battery has been drained. Usually, having a drained battery isn’t really a problem as devices would immediately respond when they’re connected to their chargers. But you would have a problem if the firmware crashes just before your phone ran out of battery.
Yes, it happens sometimes, wherein the system crashes as some services and hardware components can no longer run because the battery is already at the critical level. When it happens, you’ll be dealing with a couple of pretty minor issues that both result in an unresponsive device.
To address this, here’s what you should do:
- Plug the charger to a working wall outlet.
- Using the original cable, connect the phone to its charger.
- Regardless of whether the phone shows the charging symbol or not, leave it connected to the charger for at least 10 minutes.
- After which and while the phone is still connected to the charger, press and hold the Volume Down button and don’t release it yet.
- While holding down the volume button, press and hold the Power key as well.
- Keep both keys held down together for 15 seconds or until the Galaxy Note 10 logo shows on the screen.
If you were able to make your phone respond by doing these procedures but the problem occurs every from time to time, then you would need to reset your phone as it’s obviously a firmware issue.
Prior to the reset, make sure to create a copy or backup of your important files and data as they will be deleted, and then remove your Google account so that you won’t be locked out. When ready, follow these steps to reset your phone:
- Turn off the device.
- Press and hold the Volume Up and Power keys.
- When the Galaxy Note 10 logo shows, release all three keys.
- Your Galaxy Note 10 will continue to boot up into the Recovery Mode. Once you see a black screen with blue and yellow texts, proceed to the next step.
- Press the Volume down key several times to highlight ‘wipe data / factory reset’.
- Press Power button to select.
- Press the Volume down key until ‘Yes’ is highlighted.
- Press Power button to select and start the master reset.
- When the master reset is complete, ‘Reboot system now’ is highlighted.
- Press the Power key to restart the device.
On the other hand, if your phone still won’t turn on or still stuck on the black screen of death even after doing these procedures, then it’s time you had it replaced.
What do You do When Your Samsung Screen Goes Black?
If your phone or tablet displays only a blank screen, there are a few things you can check to determine the cause of the problem. For example, your device’s battery might be dead, or maybe it just needs to be reset.
Check the phone or tablet, charger, and USB cable.
Verify the phone, tablet, charger, and USB cable have no physical or liquid damage.
Check the USB connections for corrosion and bent pins. Inspect the Liquid Damage Indicator (LDI). The LDI should be solid white, or white with pink or purple X’s. The USB connection should be firm with very little mobility.
Remove any cases or other accessories that may cover the charging port or buttons.
Remove the battery (certain devices only).
On devices with removable batteries, remove the battery for 60 seconds and then reinsert it.
Charge the phone or tablet.
Connect and charge the phone or tablet using the supplied charger for at least 1 hour.The battery charging indicator may take up to 10 minutes to appear on the display.
Restart the phone or tablet.
Disconnect the phone or tablet and then attempt to turn it on by holding the Power key (or Side key) and Volume down key for 15-20 seconds. The Samsung Galaxy logo will appear.
- If the screen turns on, your device needed to be charged. Turn off your device and reconnect it to the supplied charger until it’s fully charged.
- If the screen fails to turn on after performing the previous steps, your device needs service. Contact the Samsung Support Center for further assistance.
What to do if Your Phone Turns on But The Screen is Black?
There is no one single reason why a cellphone screen goes black. Sometimes it can be caused by the device’s software, while other times it can be a hardware failure in the actual LCD component. The process for getting your screen back to life depends on figuring out why the screen is black, along with making a few other considerations surrounding your phone.
Software Issue
The simplest of all the cellphone screen issues to correct is a minor software glitch. These glitches can come out of nowhere and do many strange things to your device. To correct the problem, simply remove the cellphone’s battery, wait a few seconds, and then put the battery back in. Power up the device to see if the quick reset corrected the screen issue.
Additionally, some devices also have a hard reset that you can do without needing to see the screen. If your device has this kind of hard reset function, and you don’t mind losing all of the information in the cellphone, a hard reset can sometimes correct issues that a soft reset will not.
Hardware Failure
The most common reason for a cellphone’s screen to go black is a simple hardware failure. This can be caused by the actual LCD going bad, by the cable that runs between the LCD and control board going bad, or even just from the cable’s connectors coming loose. To fix these problems you need to open up the cell phone and replace or reseat the defective part.
The exact process and tools for taking your device apart will vary wildly by model, but most just require a small screwdriver and a simple pry tool. Once the device is open, inspect the LCD and cable for damage; if none is found, simply replace both parts.
Liquid Damage
When water comes into contact with an electrified board, the impurities in the water can allow current to flow in directions that it was not intended to, causing a short circuit. Even if your control board isn’t damaged by a short circuit, the corrosion caused by the water can impede the flow of electricity and cause certain areas of the cellphone to no longer function.
If you find green or brown areas of water damage on the circuitry, cleaning it off can sometimes get your device working again. Use 98 percent isopropyl alcohol and a soft brush to remove the corrosion, then put the device back together to see if anything changed.
What Causes a Samsung Phone Screen to go Black?
When you’re facing a Samsung phone black screen, you may first want to know “why has my Samsung phone screen gone black?”:
- A crashed Android system when updating or after a failed update.
- Insufficient Android internal storage may lead to a system failure or a black screen.
- Suffers from physical damage such as dropping.
However, if your phone is working but the screen goes black, you need to check the battery firstly, since your device’s battery might be out of use. If its battery works well, you are encouraged to restart the Samsung phone by long-pressing a combination of buttons.
How do You Reset a Black Screen on a Galaxy Note 20?
Assuming that your Note 20 doesn’t have signs of physical or liquid damage, then it’s probably just due to a firmware crash. There are times when Android just stops responding for no apparent reason or cause and leaves your device unresponsive. Fortunately, such an issue is easy to fix. Here’s what you should do:
- Press and hold the Volume Down button and the Power key for 10 seconds. This will trigger your device to shut down and power back up.
- Once the logo shows, release both keys and allow your phone to continue the boot process uninterrupted.
The logo is actually the sign that the problem is not serious. If you were able to make it appear, then rest assured that the problem is fixed.
How do I Fix my Black Screen?
One of the most concerning issues to plague smartphone users is a black screen, often referred to as the “black screen of death.” However, despite the harsh name, this issue can be remedied in several ways.
So, if your phone’s screen has suddenly turned off for no reason, don’t panic – simply follow these four tips.
1. Try a Hard Reset
To fix a black screen on an iPhone or Android, the first (and easiest) step is to do a hard reset. This basically entails rebooting the phone’s software. A hard reset can be performed right on your phone, although the process differs depending on what type of device you own.
If you’re wondering how to do a hard reset on an iPhone or Android, follow these steps:
Android
- Press the home and the power buttons simultaneously for 10 seconds.
- As soon as you’ve released, press down on the power button to see if it turns back on.
iPhone (Version 8 and Later)
- Press and release the volume up button.
- Press and release the volume down button.
- Press and hold the side button (also known as the sleep/wake button) until the Apple logo appears.
iPhone (Version 7)
- Press and hold the side button and the volume down button simultaneously until the Apple logo appears.
iPhone (Version 6s and Earlier)
- Press and hold the side button and the home button simultaneously until the Apple logo appears.
2. Check the LCD Cable
If you’re still staring at a blank screen, it’s possible that the cable connecting the logic board to the LCD screen has become disconnected. This can occur if you accidentally drop your phone a few times. In order to regain your screen’s functionality, the cable will need to be plugged back in.
If you want to repair a broken iPhone or Android this way, it’s best to seek help from a professional. While you may find DIY instructions online, you could risk causing irreparable damage to your device if you don’t know what you’re doing. So, if you suspect that your phone’s LCD cable is disconnected, search for a place in Las Vegas that fixes phones.
3. Perform a Factory Reset
When your phone screen goes black randomly, it may be an indication that something is wrong with your operating system. In that case, a factory reset is often beneficial. During a factory reset, your device’s data and settings are completely wiped, returning the phone to its original state (i.e., the state it was in when you first purchased it).
Not sure how to do a factory reset on an iPhone or Android? The process is more involved than that of a hard reset but can still be done with moderate ease.
iPhone
- Back up your device to iCloud or your computer. This ensures you don’t lose any important data during the reset.
- Open the settings
- Select general from the menu.
- Click the reset button at the bottom of the page.
- Click erase all content and settings. A window will pop up, allowing you to confirm your decision.
Keep in mind that this process takes longer than a simple hard reset – you may have to wait several minutes for your phone to restart. Once the process is complete, check to make sure the device has been restored to its factory settings. If you’re presented with the iOS Setup Assistant upon startup, you’ll know the reset was successful. From there, you can choose to restore your backed-up data.
Android
- Back up your device to Google Drive or your PC.
- Open your phone’s settings
- Select system > advanced > reset options.
- Select erase all data (factory reset).
- Select reset phone. At this point, you may need to enter your PIN, password, or pattern.
- Select the erase everything
Once the reset is complete, you can set up your phone and restore your backed-up data.
How do I Fix a Black Screen on my Android?
1. Force Restart Your Android
Most people opt for this method to fix the Android screen goes black too quickly because it is the easiest way to resolve it. In most cases, the problem gets fixed by simply force restarting the phone. So, if you haven’t yet tried this method, here are steps you need to follow:
Depending on the Android device model you own, you may have to use some key combination to force reboot your device, which includes:
- Press and hold down the Power, Home and Volume Up/Down keys.
- Press and hold down the Power and Home keys.
- Press and hold down the Bixby/Power key until the device powers off completely.
Don’t forget to reboot your device after it shuts down completely.
2. Wait for the Battery to Run Out and Re-charge Your Phone
To fix the Samsung tablet screen goes black issue, you can wait for the device’s battery to exhaust fully. When the battery is drained completely, charge the device and press the “Power” button to turn the phone on. See if the problem now is resolved.
3. Remove Battery
If restarting and charging the phone does not give you desired results, then if the battery is removable, you can try removing your phone battery.
- Simply start with removing the back cover of the phone.
- Take out the battery and insert it again after around 20-30 seconds.
![remove Android battery](https://i0.wp.com/web.archive.org/web/20220405055825im_/https://images.ultfone.com/topics/android-data/remove-battery.jpg?w=640&ssl=1)
While putting the battery back in the phone, make sure all the metal parts of the phone’s battery are connected with the phone. After this, charge the phone and keep it for a few hours. This will probably help you fix the Android screen black issue. If not, no worries!! Read on!!
4. Uninstall Incompatible Apps
One of the reasons behind the Android phone black screen won’t turn on is the incompatible apps you have installed on your device. So, to fix the black screen problem, all you need to do is get rid of incompatible applications and programs from your Android device in safe mode.
- Step 1: Press and hold down the “Power Button” until your device displays the restart options.
- Step 2: Press and hold down the “Power off” icon until you get the Safe Mode option.
- Step 3: Tap on the “Safe Mode” icon, and your phone will boot into safe mode.
- Step 4: Now, you can see “Safe Mode” at the bottom of your device’s screen. It means you are in safe mode now.
- Step 5: Navigate down to the “Settings” options, then go to “Apps”.
- Step 6: Click on the app; now, you will see “App Info.” Press on the “Uninstall” option to remove the app from your device.
- Step 7: Now, press the “Power” button, it will reboot the phone to normal mode.
5. Factory Reset to Eliminate Android Black Screen of Death
In case you don’t wish to download any sort of third-party tool to fix the Android screen black issue and none of the above common tricks has helped you, the last resort is the factory reset.
With factory reset, you can resolve problems like the Samsung tablet screen goes black or the phone is on but screen is black on Android. However, this method will erase your data, so go for it at your own risk.
Here’s how to factory reset:
- Step 1: Switch off the device.
- Step 2: Now, boot Android into recovery mode.
- Step 3: Once the device enters the recovery mode, use the Volume keys to highlight the “wipe data/ factory reset” option
- Step 4: Press the power button to enter and confirm the option.
- Step 5: While the factory reset function completes, the device will be rebooted. Now your problem will be fixed.
Why Has my Screen Gone Black?
Waking up to a black screen on your Android phone can be a little irritating in which the device remains on, but the screen goes black, and then it does not respond. If you wonder why does my Samsung tablet screen go dark, then the following could be reasons:
- Due to a critical system error
- The device screen’s LCD connectors could be loose
- You might have downloaded several incompatible applications
- The smartphone is overcharged for a prolonged period of time
- App caches are not cleared
- The device has been kept in extremely hot temperature
- The smartphone is running on an old battery
- The non-compatible charger is charging the battery
- There are applications installed with bugs and viruses
So, these are all possible reasons behind why does my tablet screen go black randomly. The good news is that there is no need to panic. You can fix this issue on your Android device with ease.
How do I Reset my Galaxy Note 20?
A factory reset, also known as a hard reset or master reset, is an effective, last resort method of troubleshooting for mobile phones. It will restore your phone to its original factory settings, erasing all your data in the process.
Because of this, it’s important to back up information before you do a factory reset. To do a factory reset on Galaxy S20, S20+, S20 Ultra, and Z Flip, go to Settings > General Management > Reset > Factory data reset. Then tap Reset and Delete all.
You can also use hardware keys to perform a factory reset. Turn off your phone, then press and hold the Power/Bixby key and Volume Up key, then press and hold the Power key. Release the keys when the Android mascot appears.
When the Android system recovery menu appears, use the Volume Down key to select “Wipe Data/Factory Reset” and press the Power/Bixby key to proceed. Select Yes and proceed again. When the factory reset completes, select “Reboot System Now”.
How do I Fix my Note 20?
As with most smartphones, certain problems can often be resolved quickly by installing a new software update (if one is available). As a last resort, you can also try performing a factory reset, but this should be tried only if you’ve exhausted all other possible solutions.
Problem: Samsung Galaxy Note 20 Ultra not connecting to network properly
More than a few people have reported their Note 20 Ultra is having cellular network connection issues. In most cases, users fail to get any kind of cellular network signal, although others report having a connection at one point but then losing it.
It’s very hard to say what exactly is causing this problem, although in many cases, it does appear to be a hardware/phone issue rather than one affecting the mobile network. One forum user based in the U.K. reported having this issue with the model of the phone that runs on an Exynos 990 chip, but it then disappeared after he replaced it for the model with the Qualcomm Snapdragon 865.
However, users in the United States (where Snapdragon 865 models are sold) have also reported the same issue, so we’re not sure that it has much to do with the Exynos 990.
Possible solutions:
- Try restarting the phone. This has worked for some users.
- Try turning off Wi-Fi Calling off you have this setting switched on. Go to Phone > More > Settings > Wi-Fi Calling.
- Clear your Note 20 Ultra’s cache. You can do this by booting up your phone in recovery mode.
- If possible, try a different SIM card and/or network on your phone. This may help determine whether you have a phone or network issue on your hands.
- Switch from 5G to 4G. Go to Settings > Connections > Mobile Networks > Network Mode > 4G/3G/2G (Auto Connect).
- Reset the Access Point Names for your network. Go to Settings > Connections > Mobile Networks > Access Point Names > More > Reset to Default.
Assuming that none of these actions work for you, you should try contacting Samsung and asking for either a repair or a replacement. As always, also check for a software update.
Issue: Note 20 and Note 20 Ultra overheating
This is a problem that tends to affect pretty much every smartphone, but it seems a touch more common with the Note 20 Ultra, if only because of its higher output. Overheating particularly appears to be a problem when using the Camera app, with users complaining that using the camera for more than a few minutes can really raise the phone’s temperature.
Few users (if any) of the Samsung Community forum have reported clear solutions to this issue, with some suggesting that it’s a problem inherent to the Exynos 990 processor. However, here are a few things you can try that tend to work with other Android devices with similar heating problems.
Possible solutions:
- Avoid overusing the phone in high temperatures and/or direct sunlight. This can really incite any tendencies it may have to overheat.
- Do not film video in 8K or 4K for too long. Take breaks if you need to shoot longer stretches of 8K/4K footage, or try filming only in 1080p.
- Erase battery-draining apps from your Note 20 (Ultra). This includes apps that promise to enhance performance or battery life, as well as apps that tend to run in the background. Social media apps (Facebook, Snapchat, Twitter, Tinder) are often big offenders in this respect, so get rid of any you no longer use.
- Try clearing the cache for any app you believe may be causing the overheating. To do this, go to Settings > Apps > [App] > Storage > Clear Cache.
- Some users recommend wiping your phone’s system cache (via recovery mode) or even performing a factory reset if the problem doesn’t resolve itself. However, make sure you back up your phone before performing a factory reset.
As ever, you should contact Samsung and/or the seller of your phone if problems persist even after trying all of the steps above.
Issue: Autofocus not working properly
A fairly large number of users have found that the autofocus of the Note 20 Ultra’s main camera lens (and to a lesser extent, the Note 20’s) doesn’t always work properly. Many note that the autofocus doesn’t focus automatically as it should, and that resulting pictures tend to be less than 100% clear. Some also report that this problem is particularly acute when taking close-up photos of objects.
This issue likely comes from a combination of hardware and software niggles. For one, the lack of a macro lens may have something to do with the difficulty in taking perfectly clear close-ups, yet it’s also apparent that some kind of image-processing problem is going on with non-close-ups.
As such, we expect this to be something Samsung will iron out with future software updates, so always check to see if an update is available. Otherwise, you can try the following workarounds.
Workarounds:
- Close and then reopen the Camera app.
- Try clearing the Camera app’s cache. Go to Settings > Apps > Camera > Storage > Clear Cache.
- Try switching to Video and then back to Photo. Some users report that this gets autofocus working again.
- If taking a close-up, trying moving your phone away from the subject. Try to use the periscope telephoto lens from a distance if you want a close-up rather than the main wide lens close to your subject.
- Some users have reported that shaking their Note 20 (Ultra) can kickstart the autofocus. If you try this, make sure not to do it too vigorously.
- Try cleaning the lens with a microfiber cloth.
Issue: Battery draining fast on Note 20 and Note Ultra
Given that they can operate at such high capacities, it’s probably no surprise to hear that some users have complained of their batteries draining a little too quickly. Some people have reported their Note 20’s battery dies overnight, while others have noted they’ve encountered the problem after updating to Android 11.
This is a fairly common problem for most phones, and it can often be caused by a variety of issues, from faulty hardware to less-than-optimal usage.
Workarounds:
- Wipe the phone’s cache partition via recovery mode. Switch off the phone, then press and hold the Power and Volume Up buttons. Release them when you see the Samsung logo. Then use the volume buttons to scroll through the options until you reach Wipe Cache Partition, which you can select by pressing the Power button.
- Try resetting your app preferences. Go to Settings > Apps > More > Reset App Preferences.
- Disable scanning for Wi-Fi and Bluetooth. Go to Settings > Location > Improve Accuracy > Disable Wi-Fi Scanning. Then select Disable Wi-Fi Scanning.
- Switch off background data and activity for less-important apps. You can do this by going to Settings > Apps > [App] > Mobile Data > Allow Background Data Usage > Off. Then do the same again, but after picking an app, go to Battery > Allow Background Activity > Off.
- Try turning on adaptive brightness for your display. Go to Settings > Display > Adaptive Brightness.
- It’s also worth turning on battery optimization. You can do this by going to Settings > Device Care > Battery > Power Mode > Optimized. Also activate Adaptive Power Saving on the same screen.
- Try checking your settings thoroughly for any other feature that may be working in the background that may be unnecessary. For example, certain apps check location data, which you can switch off by going to Settings > Privacy > Permission Manager > Location.
Problem: Note 20 and 20 Ultra randomly restarting by itself
This is one of the more unusual issues affecting the Note 20 and Note 20 Ultra. A relatively small handful of users have reported that their phones have a tendency to restart all by themselves at various points throughout the day.
While the Note 20 and 20 Ultra do have an auto-restart feature, this problem occurs with this feature deactivated, leaving users scratching their heads as to why it’s happening.
As of writing, there’s no clear fix for this problem. However, two possible solutions have cropped up in forum discussions, and both are worth trying. (Again, also try software updates.)
Possible solutions:
- Boot up in Safe Mode (by holding the Power button and then holding the Power Off button until the Safe Mode option appears). This restricts your phone to use only native apps, thereby preventing downloaded third-party apps from affecting how it operates. If you find that your phone doesn’t restart randomly, this provides you with an indication that a third-party app is causing the problem. As such, delete all of these apps and then add the most important ones back one by one, checking to see if the phone works normally after each new addition. If it starts playing up after you add a particular app, delete it and keep it off your phone.
- Wipe the Note 20 or Note 20 Ultra’s cache partition. You can do this by booting up the phone in recovery mode by holding the Power and Volume Up buttons when the device is switched off. Then select Wipe Cache Partition.
It almost goes without saying, but if you continue experiencing problems after trying these two steps, you ought to contact Samsung.
How do I Open my Galaxy Note 20?
If you’ve set up a lock option to unlock your screen and can’t remember it, refer to Shutdown Prevention – Nougat 7.0 and higher (Samsung) for what to do.
- Press the Side button (right edge).
- Depending upon the screen lock type, perform one of the following: If Reactivation lock was previously set up on the device, you must sign in to your Samsung account after unlock.
- Swipe the up from the bottom of the display.
- Draw the current unlock pattern.
- Enter the current PIN or password.
- Using the front-facing camera, position your face within the provided area.
- Touch the fingerprint sensor located on the bottom of the screen. If the fingerprint isn’t recognized:
- Swipe up from the bottom of the display.
- Enter the PIN, pattern or password.
- If necessary, tap ‘OK’ or ‘Done’.
Can The Black Screen of Death be Fixed?
Hardware and driver issues resulting in a Black Screen of Death can be repaired via Safe Mode.
If your computer is hanging with a black screen:
- Restart the computer
- Hold F8 or Shift and F8 to boot the computer into Safe Mode
Unable to reach Safe Mode in this way? Try turning the computer off then back on again during the Windows splash screen. On the third attempt, the system will automatically boot into Safe Mode.
With Safe Mode running:
- Click Advanced options then Troubleshoot
- From here go to Advanced options > Startup Settings > Restart
- Select option 4, Enable Safe Mode
- Wait for Windows Safe Mode to start
- Once booted, press Windows + X
- In the Quick Link menu select Device Manager
- Expand Display adapters then right-click and select Disable
- Restart the computer to recommence installation of Windows 10
If successful, run a Windows Update to download the latest device drivers and solve the Black Screen of Death issue.
Why Does my Screen go Black And Then Come Back on?
The main reason that your monitor is going black for a few seconds is that there’s a problem with the cables connecting it to your computer. This is typically the issue if your monitor goes black for only a few seconds, and then comes back on later.
The first thing you’ll want to do is ensure all of your cables are properly inserted into both the back of your monitor, but also the device that it’s connected to (laptop or computer etc).
Make sure that there’s not any damage to the ports on the back of your monitor too, as this can be a common cause of black screens. You’ll also want to check your plug socket and the plug of the monitor, as any damage to this could also be a source of your problem.
After you’ve checked the cables for any damage, in an ideal scenario you’ll also check the monitor with an alternative cable too. If you have another HDMI cable (if that’s what you’re using), then of course you’re going to want to check that with your devices too.
Why is my Google Screen Black on Android Phone?
Lately, a lot of people report that every time they try to open a new webpage or tab in their Google Chrome browser on Android, the black screen flashes and they fail to get to the desired page.
Black screen in Chrome for Android is usually a sign of a graphics display error.
For some reason, your Chrome browser interface is not displaying properly on your Android screen. As a result, some or all of the browser windows will turn black, making it impossible to display web pages.
Read Also: Make Money Online Building Mobile Websites
A black Android Chrome screen is usually a sign that something is interfering with Chrome’s ability to “draw” its interface on your screen. It may be a hardware problem on your phone, corrupt files or incorrectly configured parameters.
How do I Soft Reset my Note 20?
A soft reset is a simulated battery removal. This is used to power a device off when the screen is frozen or unresponsive and the device it has an internal battery that cannot be removed. It does not cause loss of personal data on the device.
- Press and hold the Side and Volume down key for up to 45 seconds.
- Wait as the device restarts.
A master reset restores the original factory settings and may delete your personal data on the internal storage, such as downloads, ringtones, images, apps, contacts, and Visual Voicemail. It does not delete data stored on the SIM card or SD card.
- Back up data on the internal memory. If you signed into a Samsung account, you’ve activated Anti-theft and will need to enter your Samsung credentials.
- From the Home screen, swipe up on an empty spot to open the Apps tray.
- Tap Settings > Accounts and backup.
- Tap Back up data under the desired service and make sure your data will get backed up.
- Tap the Back key (bottom right) until you reach the main Settings menu.
- Tap General Management > Reset > Factory data reset.
- Scroll to the bottom of the screen to review what information will be deleted.
- If you have an active eSIM, tap the circle if you want to delete the eSIM settings.
- If you’re using the device on the same line, leave this unchecked.
- This does not cancel your service with T-Mobile.
- If prompted, enter your security lock.
- If you’ve set up a Samsung account, enter the password.
- Tap Confirm or Delete All, then wait for the device to reset.
Summary
If your cellphone is still under warranty, then your best option may be to take it back into the store where you purchased it. Some stores have qualified technicians available to repair your device, while others will simply replace it with another phone.
Either way, your cellphone should be working again. Note, however, that this is not an option if you have opened your device to try and repair the screen or if your cellphone has water damage, as these both will void the warranty.