So, have to set up the Netgear WiFi range extender? Well, that’s good! Because after performing Netgear WiFi extender setup, you will able to get the uninterrupted internet access on your connected devices all over your home. But what’s this? Netgear extender won’t connect to the internet! Need not to worry! In this troubleshooting post, we will make you aware with all the possible solutions that will help you fix Netgear extender won’t connect to the internet issue in haste. Let’s take the plunge!

Fix: Netgear Extender Won’t Connect to the Internet Issue

Power Cycle Your Netgear Extender

First and foremost, power cycle your Netgear WiFi range extender. To initiate the process, disconnect all the devices connected to your Netgear extender and unplug your extender from the power outlet.

Now, wait for a couple of minutes. After that, plug your Netgear extender back into a working wall outlet and power it on. Connect your WiFi-enabled devices to the extended WiFi and enjoy streaming videos.

Check all the Cable Connections

The next step in our post to get rid of Netgear extender not connecting to the internet issue is to check the wired connections. Check the Ethernet cable that came along with your Netgear extender. It should be well working.

In the event that you found any cuts or damages in the Ethernet cable, replace it right away.

After replacing your Ethernet cable, connect your Netgear device to router, launch an internet browser on your PC, and try to access the extender’s GUI using mywifiext.net web address.

Just in case, the web address mywifiext.net not working for you, it is suggested to use the Netgear extender default IP address instead.

Update Your Extender’s Firmware

Obsolete firmware version on your Netgear extender may also result in the issue. So, make sure to use only an updated firmware version on your device to fix internet-related issues.

To update the firmware on your Netgear extender, you can either refer to its manual, download the Nighthawk app, or log in to the extender genie setup page and follow the on-screen instructions.

Check the Power Supply

Your Netgear extender should receive continuous and fluctuation-free power supply from its wall outlet. Also, verify that the wall plug you are using for your device is not damaged and is fluctuation-free.

Once you power up your Netgear extender, the power LED on it will become lit and green.

Configure Your Netgear Extender Properly

Be certain that you have completed the Netgear extender setup in a proper manner. On the off chance if you have performed the Netgear extender setup process partially or wrongly, you will definitely bump into the issue. Thus, ensure to configure your Netgear WiFi range extender in a proper manner.

Reset Your Netgear WiFi Range Extender

None of the troubleshooting tips listed above resolved the issue for you? Don’t sweat over it! Consider resetting your Netgear device back to default factory settings. Bear in mind that the resetting process will wipe out all the personalized settings of your

Netgear extender including username, password, and security settings. So, it is advised to take the backup of your extender’s settings prior to resetting it.

To reset your Netgear extender, all you need to do is to locate and hold the reset button on your device with the help of a pin or a paper clip, and release it. That’s it! You’re all done! You have successfully reset your Netgear extender. Now, you have to reconfigure your Netgear extender.

Endnote

That’s all! Here ends the list of our effective troubleshooting tips to get rid of Netgear extender not connecting to the internet issue. If you get stuck at any step, drop your concerns in the comments section right away.