In case you are again and again seeing Linksys Velop orange light, go through the steps given in this article and learn all the possible methods to fix the issue in no time. Let’s take the plunge!
When you see orange and amber color LED on your Linksys Velop?
An orange or amber LED on your Linksys Velop signifies major technical glitches with the device. Let’s have a look at them one-by-one:
- Outdated Firmware on Velop
On the off chance if you continue to avoid the firmware update pop-ups or notifications of your Linksys Velop for a longer time, you may get stuck with orange light issue. Therefore, access the Linksys WiFi setup page and if there is any new firmware version available, get it updated by following the on-screen instructions.
- Modem Connectivity Issue
In the event that your existing modem is not connected to your Velop, then also you may stuck with orange LED issue. Thus, to fix it, ensure that your Linksys Velop and modem are properly connected to each other using an Ethernet cable.
Once you are done, try to access the Linksys WiFi setup page to check the Ethernet connection between your Velop and modem.
- Bad Location
If your Linksys Velop is placed away from the reach of your modem or too closer to it, then also facing the annoying orange LED issue is obvious. Thus, ensure to place your Linksys Velop within the range of your modem and away from corners or the reach of neighboring WiFi.
- Improper Linksys Velop Setup
Improper or partial Linksys Velop setup may also cause the orange or amber color LED issue. In such a case, ensure to complete the Linksys Velop setup process completely and properly.
Fix: Linksys Velop Orange Light
Here are the guidelines that you need to follow in order to fix Linksys Velop orange light issue:
- Plug in your Linksys Velop into a working wall outlet.
- Do not use a damaged or worn out Ethernet cable to connect your Linksys Velop and modem.
- Place your Linksys Velop at the center-most area in your home. Do not place your Linksys Velop too closer to modem. Doing so can somehow clash their WiFi signals, resulting in Linksys Velop orange light issue.
- Do not hide your modem. Its continuous WiFi signals are very important for your Velop to perform well.
- Contact your ISP. Ask him whether you are on an active and upgraded internet plan or not.
Bonus: Add a Linksys WiFi range extender to your Velop system. Doing so will not only provide you continuous and blazing-fast internet connectivity in every nook and cranny of your house but also help you in fixing the annoying orange light issue. Simply perform Linksys extender setup, see the difference and let us know via comments whether adding Linksys extender to the Velop system proved helpful to you or not.
Still the Same? Power cycle your Linksys Velop. Rebooting or power cycling the Velop would be helpful to you in fixing the orange light issue. So, without much delay, let’s help you with the process of power cycling your Linksys Velop. Keep scrolling down!
- First of all, you have to disconnect your Linksys Velop from modem and other connected devices.
- Then, you need to turn off your Velop system and wait for at a while.
- After turning on your Velop after some time, connect it to your modem and see if the orange light issue is fixed.
Verdict
That’s all! These were some common yet major Linksys Velop orange light issues along with their fixes. If you are still seeing the same error, please let us know.
